姓名：罗正维

学历：博士研究生

职称：讲师

所在系：水质科学与技术系

办公室：尚德楼B2-511

电子邮箱：luozw2015@njtech.edu.cn

教育和工作经历

2021.05-至今 新利18彩票 ，环境科学与工程学院，讲师

2018.06-2021.04新利18彩票 ，生物与制药工程学院，博士后

2015.09-2018.06新利18彩票 ，安全科学与工程学院，博士

2011.09-2014.06新利18彩票 ，生物与制药工程学院，硕士

2007.09-2011.06皖西学院，制药与生命科学学院，学士

研究方向

工业废水深度处理与资源回收；环境功能材料开发；可再生资源利用；装备腐蚀失效分析与防护

科研项目

（1）江苏省高等学校自然科学研究面上项目，基于磁性共价有机框架回收含金氰化废水中金及深度破氰，2021-10至2023-09，在研，主持

（2）国家自然科学基金面上项目，聚丙烯基离子印迹纤维构建及对盐湖卤水中硼的高效吸附分离，2021-01至2024-12，在研，参加

代表成果

[1]Luo Z, Zuo J, Jiang H, et al. Inhibition effect of fluoride ion on corrosion of 304 stainless steel in occluded cell corrosion stage in the presence of chloride ion[J]. Metals, 2021,11(2).

[2]Luo Z, Zhang Y, Zhou Y, et al. Effect of fluoride ion on the corrosion of 304 stainless steel in (NH₄)₂SO₄solution containing chloride ions[J]. International Journal of Electrochemical Science, 2021,16(5).

[3]Luo Z, Guo M, Jiang H, et al. Plasma polymerization mediated construction of surface ion-imprinted polypropylene fibers for the selective adsorption of Cr(VI)[J]. Reactive and Functional Polymers, 2020,150:104552.

[4]Luo Z, Xu Y, Chen H, et al. Preparation of Cr(VI)-imprinted polypropylene nonwoven fibers using plasma polymerization-assisted grafting[J]. Journal of Applied Polymer Science, 2020,43(137):49317.

[5]Luo Z, Li L, Guo M, et al. Water-solid suspension grafting of dual monomers on polypropylene to prepare ion-imprinted fibers for selective adsorption of Cr(VI)[J]. Fibers and Polymers, 2020,21(12):2729-2739.

[6]Luo Z, Xu J, Zhu D, et al. Ion-imprinted polypropylene fibers fabricated by the plasma-mediated grafting strategy for efficient and selective adsorption of Cr(VI)[J]. Polymers, 2019,11(9):1508.

[7]Luo Z, Zhu D, Wang D, et al. Selective separation and recovery of fluoride ion from ammonia-based flue gas desulfurization slurry using electrodialysis[J]. Journal of Chemical Technology & Biotechnology, 2019,94(8):2561-2568.

[8]Luo Z, Wang D, Zhu D, et al. Separation of fluoride and chloride ions from ammonia-based flue gas desulfurization slurry using a two-stage electrodialysis[J]. Chemical Engineering Research and Design, 2019,147:73-82.

[9]Luo Z, Chen H, Xu J, et al. Surface grafting of styrene on polypropylene by argon plasma and its adsorption and regeneration of BTX[J]. Journal of Applied Polymer Science, 2018,135(17):46171.

[10]Luo Z, Zhu M, Guo M, et al. Ultrasonic-assisted dispersion of ZnO nanoparticles and its inhibition activity toTrichoderma viride[J]. Journal of Nanoscience and Nanotechnology, 2018,18(4):2352-2360.

[11]Luo Z, Liu K, Guo M, et al. Modification of ethyl 2-cyanoacrylate using silica and nitrile butadiene rubber to achieve high thixotropy and low internal stress[J]. Journal of Adhesion Science and Technology, 2018,32(10):1128-1141.

[12]Luo Z, Dong K, Guo M, et al. Preparation of zinc oxide nanoparticles-based starch paste and its antifungal performance as a paper adhesive[J]. Starch - Stärke, 2018,70(7-8):1700211.

[13]Luo Z, Kai D, Guo M, et al. Composite manhole covers prepared with recycled printed circuit boards as a reinforcing filler[J]. Polymer Composites, 2018,12(39):4532-4541.